Colección SciELO Chile

Departamento Gestión de Conocimiento, Monitoreo y Prospección
Consultas o comentarios: productividad@anid.cl



Firmas del autor
Nombre AGUILAR-GONZALEZ, CLAUDIO EDUARDO
Género Hombre
Área Principal WOS Materials Science, Multidisciplinary; Metallurgy & Metallurgical Engineering; Physics, Applied;
Afiliación Principal Universidad Técnica Federico Santa María
ORCID 0000-0002-9013-5835

Publicaciones en Chile

Citas Totales

Afiliaciones Chilenas

Periodo registrado: 2008 - 2025
×

¿Quieres unificar este perfil a otros que correspondan al mismo autor? Recuerda, la unificación de perfiles permite fusionar las publicaciones, asociadas a distintas firmas, en una única firma llamada "base".
Esta operación no elimina las firmas de autor originales de una publicación. Tampoco altera otras bases de datos que no sean DataCiencia.

  • Paso 1: Pincha el botón de "Unificar Perfiles"
    • - Verás un listado de firmas en las cuales coincide el primer apellido y la primera letra del nombre. Costado izquierdo de la pantalla ("Sugerencias").
    • - Ese listado está acompañado de información sobre algunas publicaciones y afiliaciones.
  • Paso 2: Selecciona una firma como "Base". Escoge aquella firma más completa.
    • - Esta firma agrupará las publicaciones de las otras firmas.
    • - Por defecto, la primera firma del listado es la que contiene más publicaciones.
  • Paso 3: Selecciona una o varias firmas como "Agrupar".
    • - Las publicaciones y afiliaciones de estas firmas se añadirán a la firma base.
  • Paso 4: Ingresa tu correo electrónico.
    • - Este es un método de validación obligatorio.
    • - Solo una solicitud por correo electrónico.
  • Paso 5: Pincha el botón "Enviar solicitud".
    • - Recibirás un correo por tu solicitud la cual estará pendiente de evaluación.
    • - Recibirás un segundo correo cuando tu solicitud sea procesada de forma completa, parcial, o rechazada.


Continuar

* ¿Por qué es necesario unificar perfiles? Muchas veces las publicaciones vienen desde el origen (WoS, Scopus o SciELO) vinculadas a distintas firmas de autor a pesar de corresponder a las mismas personas.


Disciplinas de Investigación





Muestra la distribución de la producción WoS, Scopus y SciELO del autor.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

WOS #Pub
Materials Science, Multidisciplinary 87
Metallurgy & Metallurgical Engineering 49
Physics, Applied 14
Agriculture, Multidisciplinary 12
Chemistry, Physical 11
Nanoscience & Nanotechnology 7
Agriculture, Dairy & Animal Science 6
Engineering, Multidisciplinary 6
Electrochemistry 4
Mechanics 4
Materials Science, Characterization, Testing 3
Materials Science, Characterization & Testing 3
Mining & Mineral Processing 3
Mineralogy 3
Food Science & Technology 3
Microscopy 3
Materials Science, Ceramics 3
Physics, Condensed Matter 3
Agronomy 3
Chemistry, Applied 2
Engineering, Mechanical 2
Engineering, Chemical 2
Environmental Sciences 2
Computer Science, Interdisciplinary Applications 2
Green & Sustainable Science & Technology 2
Materials Science, Biomaterials 2
Environmental Studies 2
Materials Science, Coatings & Films 2
Physics, Mathematical 2
Veterinary Sciences 1
Construction & Building Technology 1
Engineering, Civil 1
Chemistry, Multidisciplinary 1
Energy & Fuels 1
Materials Science, Composites 1
Biology 1
Biophysics 1
Biochemistry & Molecular Biology 1
Scopus #Pub
Condensed Matter Physics 38
Materials Science (All) 37
Mechanics Of Materials 36
Mechanical Engineering 27
Materials Chemistry 24
Metals And Alloys 22
Animal Science And Zoology 8
Physics And Astronomy (All) 8
Physical And Theoretical Chemistry 7
Chemistry (All) 7
Engineering (All) 4
Ceramics And Composites 4
Agronomy And Crop Science 4
Electrochemistry 3
Electronic, Optical And Magnetic Materials 3
Energy Engineering And Power Technology 3
Surfaces, Coatings And Films 3
Surfaces And Interfaces 2
Computational Mathematics 2
Hardware And Architecture 2
Organic Chemistry 2
Chemical Engineering (All) 2
Computer Science (All) 2
Food Science 2
Fuel Technology 1
Biophysics 1
Renewable Energy, Sustainability And The Environment 1
Process Chemistry And Technology 1
Geotechnical Engineering And Engineering Geology 1
Civil And Structural Engineering 1
Industrial And Manufacturing Engineering 1
Food Animals 1
Materials Science (Miscellaneous) 1
Geochemistry And Petrology 1
Veterinary (All) 1
SciELO #Pub
Agricultural Sciences 7

Bases de Datos



Muestra la distribución de las publicaciones del autor en las distintas bases de datos* (WoS, Scopus y SciELO-Chile).

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

* Una misma publicación puede pertenecer a más de una base de datos.

Base de Datos #Publicaciones
WOS 142
Scopus 148
SciELO 7

Coautores



Autor Género # Pub
PAVEZ, J Hombre 1
CERDA, H. Hombre 1
VALLE, CARLOS Hombre 1
GNANAPRAKASAM, PERIYASAMI - 1
BAS-MIR, FERNANDO JAVIER Hombre 2
SANTANDER, MARIO Hombre 3
GONZALEZ, FELIPE Hombre 1
CHICARDI, E. Hombre 2
USUBA, J. Hombre 1
EGANA, JUAN I. Hombre 1
RIVERA, OSCAR Hombre 1
PORTILLO, CARLOS Hombre 1
PIO, E. Hombre 13
AZOCAR-GUZMAN, MANUEL IGNACIO Hombre 1
ARANCIBIA, MARIETTE Mujer 1
TELLO, KAREM Hombre 3
PAEZ-COLLIO, MARITZA ANGELICA Mujer 2
PARRA-GONZALEZ, CAROLINA IVON Mujer 4
CANCINO, D. Hombre 2
PINEDA, FABIOLA Mujer 2
ESPINOZA, CAROLINA Mujer 2
MUNOZ, LISA Mujer 6
OLIVARES-PACHECO, JUAN F. Hombre 1
CASTELLARO-GALDAMES, GIORGIO Hombre 1
BRIONES, E. - 1
GUERRA, CAROLINA Mujer 9
DIAZ, CLAUDIO Hombre 2
SOLIZ, ALVARO Hombre 4
MUNOZ-VELASCO, PEDRO Hombre 1
MARTIN, M. ALDAYA Hombre 2
PALMA-MOYA, SERGIO ANDRES Hombre 1
VARGAS-BELLO-PEREZ, EINAR Hombre 6
PEREZ M., PATRICIO Hombre 3
SANCY-VELASQUEZ, MAMIE ODETTE Mujer 13
SEPULVEDA, ROSSANA Mujer 2
PALACIOS, JOSE Hombre 1
CERDA-VILLABLANCA, MAURICIO DAVID Hombre 1
BRIONES, F. Hombre 7
AGUILERA-LEON, ALFREDO ARMANDO Hombre 1
JOSE IDALSOAGA, MARA Mujer 1
IDALSOAGA, MARÍA JOSÉ Mujer 1
GUZMAN-MELENDEZ, PATRICIO RICARDO Hombre 1
CORNEJO, KAREN Mujer 1
TRONCOSO-AGUILERA, LORETO DEL PILAR Mujer 1
CASTRO-CERDA, FELIPE MANUEL Hombre 3
MUTHIAH, THIRUMURUGAN - 2
MARTINEZ-UGALDE, CAROLA ANDREA Mujer 20
GUZMAN-MENDEZ, ALEXIS ANTONIO Hombre 1
DE BARBIERI, FLAVIO Hombre 2
TORO-MUJICA, PAULA MACARENA Mujer 12
VIANCOS, FRANCISCO Hombre 1
GUZMAN-MENDEZ, DANNY FRANCISCO Hombre 39
DOMANCIC, D. - 1
ARANCIBIA, M. Mujer 1
MARTIN-DE JULIAN, PABLO Hombre 3
HENRIQUEZ-AVALOS, RICARDO ANDRES Hombre 1
LASCANO-FARAK, SHEILA KATHERINE Mujer 9
RIOS-RODRIGUEZ, ROLANDO Hombre 1
THIRUMURUGAN, M. - 3
UGALDE, C. Hombre 1
LUND-PLANTAT, FERNANDO CARLOS Hombre 5
BURGOS-OLAVARRIA, FRANCISCO Hombre 1
TELLO, FRANCO. A. - 1
VERA-ARAVENA, ROSA DE LAS MERCEDES Mujer 2
MARTINEZ, M. Hombre 5
SERAFINI, DANIEL Hombre 9
WALCZAK, MAGDALENA MARTA Mujer 3
VERA-INFANZON, RAUL RAMON Hombre 18
LIRA, R. Hombre 5
PENA-REYES, IVAN LUIS Hombre 4
SQUELLA-NARDUCCI, FERNANDO Hombre 3
VALENZUELA, ALFONSO Hombre 1
VERA I, RAUL Hombre 1
ASOMAVICH, I. - 1
MUJICA-FERNANDEZ, NICOLAS Hombre 4
FERNANDEZ-ORDENES, JORGE OSVALDO Hombre 2
ORDONEZ, STELLA Mujer 15
LOPEZ, MARTA Mujer 2
VARGAS-CANTIN, PATRICIO Hombre 1
MORALES-SALINAS, LUIS JOSE ALEJANDRO Hombre 1
PEREZ-POZO, LUIS CARLOS Hombre 6
MANGALARAJA, RAMALINGA VISWANATHAN - 9
GARIN-CORDOVA, JORGE LEONIDAS Hombre 1
ROJAS-SAPERAS, PAULA ANDREA Mujer 28
BRIONES-ARREGUI, IGNACIO Hombre 3
VALDERRAMA, L. Hombre 2
PAVEZ-MIQUELES, OSVALDO FLORENTINO Hombre 4
ZUMELZU-DELGADO, ERNESTO SEGUNDO Hombre 1
CABEZAS-CUEVAS, CARLOS AGUSTIN Hombre 1
GARCIA, CAROLINA Mujer 1
NAVEA, L. - 3
VARGAS-VALERO, JOSE TOMAS Hombre 1
MARTIN, P. - 1
DELONCA, ADELINE Mujer 1
CUBILLOS, MARIELA Mujer 1
SAN MARTIN, FRANCISCA Mujer 5
RODRIGUEZ, S. Mujer 1
MARTINEZ, CRISTIAN Hombre 1
GIORGIO CASTELLARO, G. - 1
AGUILAR G, CLAUDIO Hombre 1
CLAUDIO AGUILAR, G. - 1
RAÚL VERA, I. - 1
LUIS MORALES, S. - 1
QUENAYA, JAVIERA Mujer 1
YUTRONIC, HANJA - 1
CARDOSO-GIL, RAÚL Hombre 1
MARTÍNEZ, CAROLA Mujer 1
MARTÍN, FRANCISCA SAN Mujer 1
MARTÍNEZ, CAROLA Mujer 1
MAINO, M. Hombre 1
SERAFNI, DANIEL Hombre 1
SILVA, WASHINGTON - 2
MORALES, MARIA SOL Mujer 1
GALLEGUILLOS, FELIPE Hombre 1
NEVES, GELMIRES DE ARAUJO Hombre 2
TAPIA, PATRICIA Mujer 1
PIO LOPEZ, EDGAR IVAN Hombre 1
MARTIN SAINT-LAURENCE, PABLO IGNACIO Hombre 1
GONZALEZ, RODRIGO Hombre 5
ESTAY, DANILO Hombre 1
MARTIN, P. - 1
MUÑOZ, HUGO Hombre 1
SAINT-LAURENCE, PABLO IGNACIO MARTIN Hombre 1
AGUIRRE, T. - 1
MARTÍNEZ, C. - 1
MARTÍN, F. SAN - 1
SOLIZ, A. - 1
GONZALEZ, JAVIERA Mujer 1
ARAYA, NICOLAS Hombre 4
MARTIN, P. - 1
ROLLERI, ALDO Hombre 1
DUBRAY, GABRIEL Hombre 1
MARTIN, FILOROMO SAN - 1
VALVERDE, BARBARA Mujer 1
UDAYABHASKAR, R. - 1
ARCOS, CAMILA Mujer 1
KRACHT, W. Hombre 1
MARTÍN, FRANCISCA SAN Mujer 1
VALLES, IGNACIO Hombre 1
CLAVERIAS, FERNANDA P. Mujer 1
SILVA, DANIELA Mujer 4
MADRID-CORTES, C. E. - 1
CÁCERES, C. Hombre 2
GUZMÁN, ALEXIS Hombre 6
OSORIO, MAKARENA - 1
BARRALES, LUIS Hombre 1
BOTELLO, E. Hombre 1
CARVAJAL, LINTON Hombre 1
MONTERO, CECILIA Mujer 1
MURANDA, DIEGO - 3
UNDABARRENA, A. - 1
BARROS, J. L. - 1
WALTER, MARIANA Mujer 1
HENRIQUEZ, J. Hombre 3
VEGA, D. - 1
MARTINEZ, M. Hombre 2
CÁMARA, BEATRIZ Mujer 1
ALLENDE-CID, HÉCTOR Hombre 1
SALVO, CHRISTOPHER Hombre 13
SAUCEDA, SERGIO Hombre 1
GONZALEZ, DANIEL Hombre 1
PERALTA, C. - 1
GONZÁLEZ, F. - 1
ARAYA, E. Hombre 1
SALINAS-BARRERA, VICENTE Hombre 11
MARTINEZ, M. Hombre 1
FELIU, DANIEL Hombre 1
SALINAS, DANIELA Mujer 1
SOSA, MARIA - 1
BARRERA, VICENTE SALINAS - 1
JIMENEZ-AREVALO, VICTOR - 1
IBACA, F. B. - 1
HERMOSILLA, RODRIGO - 1
MADRID, C. - 1
JIMENEZ-AREVALO, VICTOR M. - 1
FIGUEROA, AUGUSTO - 1
PAEZ, MARITZA - 1


Muestra un listado ordenado de los co-autores del autor en publicaciones desde el año 2008.

La gráfica adjunta, muestra la distribución de los co-autores por género.

Es importante mencionar que si no se encuentra el nombre del autor en el diccionario (que está en permanente actualización) este no se contabiliza y su género es Indeterminado.

Porcentaje Indeterminados: 23.2 % del total de co-autores

Afiliaciones





Muestra la distribución de las afiliaciones del autor de acuerdo a su producción desde el año 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Métricas Incites®



Año Firma Institución (Incites asoc.) H Index Average Percentile Impact Citation Impact Relative World Impact Journal Normalized Citation Impact Category Normalized Citation Percentage Cited Percentage Top 1 Percentage Top 10 Percentage Journal Q1 Percentage Journal Q2 Percentage Journal Q3 Percentage Journal Q4
2019 Aguilar, C. Universidad Tecnica Federico Santa Maria 8.0 62.3 5.6 0.6 0.7 0.7 63.3 0.0 13.3 52.0 28.0 12.0 8.0
2019 Aguilar, Claudio Pontificia Universidad Catolica de Chile 5.0 61.2 4.3 0.5 0.7 0.5 84.6 0.0 0.0 18.2 27.3 9.1 45.5
2019 Aguilar, Claudio Universidad Tecnica Federico Santa Maria 2.0 74.7 1.5 0.2 0.4 0.4 72.7 0.0 0.0 33.3 22.2 0.0 44.4
2019 Aguilar, C. Universidad Austral de Chile 5.0 58.8 8.8 1.0 0.7 0.4 90.0 0.0 0.0 55.6 11.1 33.3 0.0
2019 Aguilar, C. Pontificia Universidad Catolica de Chile 4.0 48.0 10.0 1.1 1.2 0.9 100.0 0.0 0.0 20.0 20.0 60.0 0.0
2019 Aguilar, C. D. Pontificia Universidad Catolica de Chile 1.0 80.2 2.0 0.2 0.2 0.2 100.0 0.0 0.0 0.0 0.0 0.0 0.0
2019 Aguilar, Claudio Universidad Austral de Chile 0.0 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
2024 Aguilar, Claudio E Universidad Tecnica Federico Santa Maria 19.0 39.8 0.0 0.7 0.0 0.0 0.0 0.9 3.7 40.2 0.0 0.0 0.0

Muestra una serie de métricas Incites para el autor según el año.

Las métricas incites están asociadas a una firma de autor y una institución. Por esa razón, se pueden desplegar en más de una fila por autor.

Publicaciones/Citas en Chile por Año



Número de publicaciones por año para el autor seleccionado.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Número de citas recibidas por las publicaciones del autor seleccionado según año de publicación.

Liderazgo



Muestra la distribución de las publicaciones del autor según su liderazgo* en estas.
* Liderazgo se define porque el autor es primer autor o autor de correspondencia en las publicaciones.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Muestra el número de publicaciones lideradas* y no lideradas por el autor en cada año.
* Liderazgo se define porque el autor es primer autor o autor de correspondencia en las publicaciones.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Origen de Citas Identificadas



Muestra la distribución de países cuyos autores citan las publicaciones del Autor consultado.

Citas identificadas: Las citas provienen de documentos incluidos en la base de datos de DATACIENCIA

Citas Identificadas: 14.46 %
Citas No-identificadas: 85.53999999999999 %

Muestra la distribución de instituciones nacionales o extranjeras cuyos autores citan las publicaciones del Autor consultado.

Citas identificadas: Las citas provienen de documentos incluidos en la base de datos de DATACIENCIA

Citas Identificadas: 14.46 %
Citas No-identificadas: 85.53999999999999 %

Publicaciones en Chile



Título Año Citas Tipo Revista Indexada
The Influence Of Mechanical Activation Process On The Microstructure And Mechanical Properties Of Bulk Ti<Sub>2</Sub>Al N Max Phase Obtained By Reactive Hot Pressing 2019 17 artículo de investigación Ceramics International WoS Scopus
Study Of The Adhesion Mechanism Of Acidithiobacillus Ferrooxidans To Pyrite In Fresh And Saline Water 2019 2 artículo de investigación Minerals WoS Scopus
Mechanically Enhanced Novel Ti Based Alloy Foams Obtained By Hot Pressing 2019 10 artículo de investigación Materials Science And Engineering A Structural Materials Properties Microstructure And Processing WoS Scopus
Synthesis, Characterization And Mechanical Properties Of Ti Nb Ta Zr Foams For Biomedical Applications 2019 1 proceedings paper Materials Today: Proceedings WoS Scopus
Effects Of Post Discharge Nitriding On The Structural And Corrosion Properties Of 4140 Alloyed Steel 2019 8 artículo de investigación Surface & Coatings Technology WoS Scopus
Structural Study Of Novel Nanocrystalline Fcc Ti Ta Sn Alloy 2019 11 artículo de investigación Metallurgical And Materials Transactions A Physical Metallurgy And Materials Science WoS Scopus
Influence Of Porosity On The Elastic Modulus Of Ti Zr Ta Nb Foams With A Low Nb Content 2019 12 artículo de investigación Metals WoS Scopus
Production Of Ag Zn O Powders By Hot Mechanochemical Processing 2019 7 artículo de investigación Transactions Of Nonferrous Metals Society Of China WoS Scopus
Enhanced Mechanical And Electrical Properties Of Novel Graphene Reinforced Copper Matrix Composites 2019 53 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
A Further Study Of The Kinetics Of Recrystallization And Grain Growth Of Cold Rolled Twip Steel 2018 4 artículo de investigación Revista De Metalurgia WoS Scopus
Thermodynamic Analysis Of Fe Contamination In Cu Mo Alloys Processed By Mechanical Alloying 2018 3 artículo de investigación Philosophical Magazine Letters WoS Scopus
Linear Versus Nonlinear Acoustic Probing Of Plasticity In Metals: A Quantitative Assessment 2018 15 artículo de investigación Materials WoS Scopus
Effects Of Zr On The Amorphization Of Cu Ni Zr Alloys Prepared By Mechanical Alloying 2018 10 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Evolution Of Oxide Film On The Internal Porosity Of Ti 30 Nb 13 Ta 2 Mn Alloy Foam 2018 15 artículo de investigación Electrochimica Acta WoS Scopus
Synthesis And Electrochemical Properties Of Ti Si Alloys Prepared By Mechanical Alloying And Heat Treatment 2018 2 artículo de investigación Metals WoS Scopus
Effect Of Heat Treatments And Si C Content In The Mechanical Properties And Microstructure Of Self Lubricating Steels 2018 0 artículo de investigación Materials Research Ibero American #Journal Of Materials WoS Scopus
Influence Of The Mn Content On The Ti Nbx Mn Alloys With A Novel Fcc Structure 2018 7 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Development Of A Novel Fcc Structure For An Amorphous Nanocrystalline Ti 33 Nb 4 Mn (At.%) Ternary Alloy 2018 19 artículo de investigación Materials Characterization WoS Scopus
Carbon Footprint Of Sheep Production Systems In Semi Arid Zone Of Chile: A Simulation Based Approach Of Productive Scenarios And Precipitation Patterns 2017 12 artículo de investigación Agricultural Systems WoS Scopus
Microstructural And Mechanical Characterization Of Copper, Nickel, And Cu Based Alloys Obtained By Mechanical Alloying And Hot Pressing 2017 13 artículo de investigación Materials Letters WoS Scopus
Microstructure And Mechanical Properties Of Copper, Nickel And Ternary Alloys Cu Ni Zr Obtained By Mechanical Alloying And Hot Pressing 2017 11 artículo de investigación Mrs Advances WoS Scopus
Novel Route To Synthesize Metallic Alloys By Applying Low Energy Centrifugal Field 2017 1 artículo de investigación Physica Status Solidi B Basic Solid State Physics WoS Scopus
In Situ Monitoring Of Dislocation Proliferation During Plastic Deformation Using Ultrasound 2017 13 artículo de investigación International Journal Of Plasticity WoS Scopus
Characterization Of Al Si Cu Mg Foams Manufactured In Situ 2017 5 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Study On The Microstructural Evolution Of Ti Nb Based Alloy Obtained By High Energy Ball Milling 2017 38 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Characterization Of Phase Changes During Fabrication Of Copper Alloys, Crystalline And Non Crystalline, Prepared By Mechanical Alloying 2016 5 artículo de investigación Ingenieria E Investigacion WoS Scopus
Use Of Incremental Levels Of Dehydrated Olive Cake In Lamb Diets As An Alternative For Grazing Systems In The Central Dryland Area In Chile: The Effect On Carcass Traits Of Suffolk Down Lambs 2016 0 artículo de investigación Ciencia E Investigación Agraria Revista Latinoamericana En Ciencias De La Agricultura Y Ambientales WoS SciELO Scopus
A Simulation Based Approach For Evaluating The Effects Of Farm Type, Management, And Rainfall On The Water Footprint Of Sheep Grazing Systems In A Semi Arid Environment 2016 8 artículo de investigación Agricultural Systems WoS Scopus
Fractal Analysis Of The Heat Treatment Response For Multiphase Al Alloys 2016 6 artículo de investigación Materials Research Ibero American #Journal Of Materials WoS Scopus
Synthesis And Characterization Of Mechanical Alloyed Mg Ni Ca And Mg Cu Ca Amorphous Alloys 2015 2 proceedings paper International Congress Of Science And Technology Of Metallurgy And Materials, Sam Conamet 2013 WoS
A Novel Solid State Method For Manufacturing Al Foams By Over Solution Heat Treatment 2016 5 artículo de investigación Materials Letters WoS Scopus
Solid Solution And Amorphous Phase In Ti Nb Ta Mn Systems Synthesized By Mechanical Alloying 2016 28 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Advances On Indirect Methods To Evaluate Tool Wear For Radiata Pine Solid Wood Molding 2016 7 artículo de investigación Wear WoS Scopus
Changes In The Pastoral Sheep Systems Of Semi Arid Mediterranean Areas: Association With Common Agricultural Policy Reform And Implications For Sustainability 2015 11 artículo de investigación Spanish Journal Of Agricultural Research WoS Scopus
Synthesis And Characterization Of Ti Ta Nb Mn Foams 2016 23 artículo de investigación Materials Science & Engineering C Materials For Biological Applications WoS Scopus
Sheep Production Systems In The Semi Arid Zone: Changes And Simulated Bio Economic Performances In A Case Study In Central Chile 2015 23 artículo de investigación Livestock Science WoS Scopus
Production Of Copper Based Metallic Glasses: Evolution Of The Phases During Mechanical Alloying 2015 2 artículo de investigación Materia Rio De Janeiro WoS Scopus
Study Of Ni Microstructural Changes When Subjected To High Energy Milling 2015 2 artículo de investigación Materia Rio De Janeiro WoS Scopus
Dem Fea Estimation Of Pores Arrangement Effect On The Compressive Young's Modulus For Mg Foams 2015 12 artículo de investigación Computational Materials Science WoS Scopus
Economic Sustainability Of Organic Dairy Sheep Systems In Central Spain 2015 12 artículo de investigación Italian #Journal Of Animal Science WoS Scopus
Simplified Fractal Fea Model For The Estimation Of The Young's Modulus Of Ti Foams Obtained By Powder Metallurgy 2015 14 artículo de investigación Materials And Design WoS Scopus
Fea Evaluation Of The Al4 C3 Formation Effect On The Young's Modulus Of Carbon Nanotube Reinforced Aluminum Matrix Composites 2015 41 artículo de investigación Composite Structures WoS Scopus
Production And Characterisation Of Mechanical Properties Of Ti Nb Ta Mn Alloys Foams For Biomedical Applications 2015 2 artículo de investigación Powder Metallurgy WoS Scopus
Characterization Of Cheese Consumers In Santiago Province, Chile 2014 9 artículo de investigación Ciencia E Investigación Agraria Revista Latinoamericana En Ciencias De La Agricultura Y Ambientales WoS SciELO Scopus
Synthesis Of Ag Zn O Powders By Means Of A Mechanochemical Process 2014 7 artículo de investigación Applied Physics A Materials Science & Processing WoS Scopus
A Comparative Study Of The Fatty Acid Profiles In Commercial Sheep Cheeses 2014 16 artículo de investigación Grasas Y Aceites WoS Scopus
Improvement Of Fea Estimations For Compression Behavior Of Mg Foams Based On Experimental Observations 2014 10 artículo de investigación Computational Materials Science WoS Scopus
Fabrication Of Nanocrystalline Alloys Cu Cr Mo Super Satured Solid Solution By Mechanical Alloying 2014 25 artículo de investigación Materials Chemistry And Physics WoS Scopus
Feeding Extruded Linseed To Dairy Ewes Under Extensive Grazing Conditions 2014 2 artículo de investigación Ciencia E Investigación Agraria Revista Latinoamericana En Ciencias De La Agricultura Y Ambientales WoS SciELO Scopus
Study Of The Influence Of Cu And Ni On The Kinetics Of Strain Induced Martensite In Austempered Ductile Cast Iron 2013 0 artículo de investigación Revista De Metalurgia WoS Scopus
Mechanical Alloying And Subsequent Heat Treatment Of Ag Zn Powders 2013 8 artículo de investigación Transactions Of Nonferrous Metals Society Of China WoS Scopus
Feeding Olive Cake To Ewes Improves Fatty Acid Profile Of Milk And Cheese 2013 39 artículo de investigación Animal Feed Science And Technology WoS Scopus
Effect Of Dietary Inclusion Of Lampante Olive Oil On Milk And Cheese Fatty Acid Profiles Of Ewes 2013 10 artículo de investigación Grasas Y Aceites WoS Scopus
Performance Of Lambs Grazing An Annual Mediterranean Pasture Or Fed Supplements Based On Olive Oil Cake Or Maize And Its Influence On System Outputs 2013 5 artículo de investigación Animal Production Science WoS Scopus
Degradation Of Metal Polymer Composite Submitted To Uniaxial Deformations In 3.5% Na Cl Solution 2013 4 artículo de investigación Journal Of Adhesion Science And Technology WoS Scopus
Lipid And Volatile Fractions Of Hard And Semi Hard Farmhouse Sheep Milk Cheeses From Chile 2013 3 artículo de investigación Dairy Science & Technology WoS Scopus
A Simulation Model Of Mesophytic Perennial Grasslands 2012 2 artículo de investigación Chilean Journal Of Agricultural Research WoS SciELO Scopus
Structural Study Of Nanocrystalline Solid Solution Of Cu Mo Obtained By Mechanical Alloying 2012 35 artículo de investigación Materials Science And Engineering A Structural Materials Properties Microstructure And Processing WoS Scopus
Effect Of Mechanical Activation On The Barite Carbothermic Reduction 2012 16 artículo de investigación International Journal Of Mineral Processing WoS Scopus
Technical Efficiency And Viability Of Organic Dairy Sheep Farming Systems In A Traditional Area For Sheep Production In Spain 2011 43 artículo de investigación Small Ruminant Research WoS Scopus
Simple Thermodynamic Model Of The Extension Of Solid Solution Of Cu Mo Alloys Processed By Mechanical Alloying 2011 28 artículo de investigación Materials Chemistry And Physics WoS Scopus
Effect Of Amorphous Mg50 Ni50 On Hydriding And Dehydriding Behavior Of Mg2 Ni Alloy 2011 9 artículo de investigación Materials Characterization WoS Scopus
Sulphuric Acid Leaching Of Mechanically Activated Chalcopyrite 2010 1 artículo de investigación Revista Facultad De Ingenieria Universidad De Antioquia WoS Scopus
Mechanical Alloying Of Cu X Cr (X = 3, 5 And 8 Wt.%) Alloys 2010 24 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Thermal Stability Of Amorphous Mg50 Ni50 Alloy Produced By Mechanical Alloying 2010 13 artículo de investigación Journal Of Non Crystalline Solids WoS Scopus
Feeding Dry Olive Cake Modifies Subcutaneous Fat Composition In Lambs, Noting Cake Resistance To Degradation And Peroxidation 2009 20 artículo de investigación Chilean Journal Of Agricultural Research WoS SciELO Scopus
Effect Of The Milling Time On Thermal Stability Of Mechanically Alloyed Mg50 Ni50 Amorphous Alloy 2009 1 artículo de investigación Revista De Metalurgia WoS Scopus
Differentiation Of Sheep Milk And Cheese Based On Quality And Composition 2009 10 revisión Ciencia E Investigación Agraria Revista Latinoamericana En Ciencias De La Agricultura Y Ambientales WoS SciELO Scopus
Use Of Supplements And Variation In The Stocking Rate In Cow Calf Systems On Temperate Pastures In Chile: A Simulation Approach 2009 5 artículo de investigación Animal Production Science WoS Scopus
X Ray Profile Analysis Of Cu 8wt.%Cr Processed By Mechanical Alloying 2009 3 artículo de investigación Materia Rio De Janeiro WoS Scopus
Modelling Supplementation Strategies For Beef Steer Rearing And Fattening Systems In Southern Chile 2009 6 artículo de investigación Chilean Journal Of Agricultural Research WoS SciELO Scopus
Indications Of The Formation Of An Oversaturated Solid Solution During Hydrogenation Of Mg Ni Based Nanocomposite Produced By Mechanical Alloying 2009 13 artículo de investigación International Journal Of Hydrogen Energy WoS Scopus
Arsenic Removal By Using Colloidal Adsorption Flotation Utilizing Fe(oh)(3) Floc In A Dissolved Air Flotation System 2009 1 artículo de investigación Revista De Metalurgia WoS Scopus
Thermodynamic Analysis Of The Change Of Solid Solubility In A Binary System Processed By Mechanical Alloying 2009 22 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
X Ray Diffraction Line Profile Analysis Of Cu 2 Wt. % Cr 6 Wt. % Mo Alloy Mechanically Alloyed 2008 2 artículo de investigación Revista De Metalurgia WoS Scopus
Effects Of Mo Concentration On The Structural And Corrosion Properties Of Cu Alloy 2019 3 artículo de investigación Metals WoS Scopus
Semi Empirical Computational Thermodynamic Calculations Used To Predict Carbide Dissociation In Fe Matrix 2020 10 artículo de investigación Materials Chemistry And Physics WoS Scopus
Thermodynamic Analysis Of The Formation Of Fcc And Bcc Solid Solutions Of Ti Based Ternary Alloys By Mechanical Alloying 2020 5 artículo de investigación Metals WoS Scopus
Two Fibers Used In The Colombian Amazonia And Their Use As Potential Reinforcement For Composite Materials 2019 0 proceedings paper Minerals, Metals And Materials Series WoS Scopus
Effect Of Porosity On Mechanical And Electrochemical Properties Of Ti 6 Al 4 V Alloy 2020 21 artículo de investigación Electrochimica Acta WoS Scopus
Effect Of Added Porosity On A Novel Porous Ti Nb Ta Fe Mn Alloy Exposed To Simulated Body Fluid 2020 12 artículo de investigación Materials Science & Engineering C Materials For Biological Applications WoS Scopus
Waste Tire Rubber Powders Based Composite Materials 2019 3 proceedings paper Minerals, Metals And Materials Series WoS Scopus
The Effect Of Alumina Particles On The Microstructural And Mechanical Properties Of Copper Foams Fabricated By Space Holder Method 2018 3 artículo de investigación Materials Research Express WoS Scopus
Beef Production Systems In Southern Chile. Typology And Evolution Between 1997 And 2007 Sistemas De Producción De Carne Bovina En El Sur De Chile: Tipología Y Evolución Entre 1997 Y 2007 2018 0 Archivos De Zootecnia Scopus WoS
Mg2 Nni0.5 Co0.5compound Obtaining By Mechanical Alloying And Their Performance On Hydriding Process Obtención Del Compuesto Mg2 Ni0.5 Co0.5mediante Aleado Mecánico Y Estudio De Su Comportamiento Frente Al Proceso De Hidruración 2017 0 Dyna Colombia Scopus WoS
Mechanical Properties Of Copper Foams Reinforced With Alumina Particles 2014 0 Scopus
Relationship Between The Chemical Composition And Atomic Volume In Ag X % At Zn (X ≤ 20) Solid Solutions Relación Entre La Composición Química Y El Volumen Atómico En Soluciones Sólidas Ag X % At Zn (X ≤ 20) 2014 0 Dyna Colombia Scopus WoS
Sulphuric Acid Leaching Of Mechanically Activated Chalcopyrite Lixiviación De Calcopirita Mecánicamente Activada Utilizando ácido Sulfúrico 2010 0 Revista Facultad De Ingenieria Universidad De Antioquia Scopus WoS
X Ray Diffraction Line Profile Analysis Of Cu 2 Wt. % Cr 6 Wt. % Mo Alloy Mechanically Alloyed Análisis De Perfiles De Difracción De Una Aleación Cu 2 % En Peso Cr 6 % En Peso Mo, Aleada Mecánicamente 2008 0 Revista De Metalurgia Scopus WoS
Fractal And Conventional Analysis Of Cu Content Effect On The Microstructure Of Al Si Cu Mg Alloys 2020 4 artículo de investigación Materials Research Ibero American #Journal Of Materials WoS Scopus
Tribological Performance Of Porous Ti Nb Ta Fe Mn Alloy In Dry Condition 2020 0 artículo de investigación Materials WoS Scopus
Analysis Of Microstructural Parameters And Quantification Of Phases In A Plasma Nitrided Aisi 4140 Steel 2020 1 artículo de investigación Philosophical Magazine Letters WoS Scopus
Study Of X Ray Diffraction Profiles Of A Ti 13 Ta 3 Sn Alloy Obtained By Mechanical Alloying 2020 0 artículo de investigación Materia Rio De Janeiro WoS Scopus
Effect Of Ni Addition And Cryogenic Hardening On The Mechanical And Tribological Properties Of Self Lubricating Steels Produced By Mim 2020 1 artículo de investigación Powder Metallurgy WoS Scopus
Effect Of Hot Pressing And Hot Isostatic Pressing On The Microstructure, Hardness, And Wear Behavior Of Nickel 2020 6 artículo de investigación Materials Letters WoS Scopus
Production Of Aluminum Foams With Hierarchical Porosity By A Combination Of Two Different Manufacturing Methods 2020 3 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Influence Of The Synthesis Technique On Tribological Behavior Of A Ti 6 Al 4 V Alloy 2020 4 artículo de investigación Materials Letters WoS Scopus
Effect Of Sn On Synthesis Of Nanocrystalline Ti Based Alloy With Fcc Structure 2020 7 artículo de investigación Transactions Of Nonferrous Metals Society Of China WoS Scopus
The Effect Of <I>Staphylococcus Aureus</I> On The Electrochemical Behavior Of Porous Ti 6 Al 4 V Alloy 2020 12 artículo de investigación Bioelectrochemistry WoS Scopus
Improving The Mechanical Strength Of Ternary Beta Titanium Alloy (Ti Ta Sn) Foams, Using A Bimodal Microstructure 2020 8 artículo de investigación Materials And Design WoS Scopus
Study Of Silicon Carbide Dissociation Into Fe And Fe C Matrixes Produced By Die Pressing And Sintering 2020 8 artículo de investigación Materials Chemistry And Physics WoS Scopus
Powder Metallurgy Production Of Ti 2 Wt Pct Si Alloy: Structural, Mechanical, And Electrochemical Characterization Of The Sintered Material 2020 1 artículo de investigación Metallurgical And Materials Transactions A Physical Metallurgy And Materials Science WoS Scopus
Electrochemical Study Of Metallic Foams Ti Ta Sn Through Sem 2020 0 Microscopy And Microanalysis Scopus WoS
Study Of The Effect Of The Floating Die Compaction On Mechanical Properties Of Titanium Foams 2020 3 artículo de investigación Metals WoS Scopus
Microstructure, Electrical And Mechanical Properties Of Ti<Sub>2</Sub>Al N Max Phase Reinforced Copper Matrix Composites Processed By Hot Pressing 2021 17 artículo de investigación Materials Characterization WoS Scopus
A Study On The Phase Formation And Magnetic Properties Of Fe Ni Co Cu M (M = Mo, Nb) High Entropy Alloys Processed Through Powder Metallurgy 2021 4 artículo de investigación Metallurgical And Materials Transactions A Physical Metallurgy And Materials Science WoS Scopus
Materials Analysis Applying Thermodynamic (Maat) Software: A Friendly And Free Tool To Analyze The Formation Of Solid Solutions, Amorphous Phases And Intermetallic Compounds 2021 5 artículo de investigación Computer Physics Communications WoS Scopus
Evolution Of Synthesis Of Fcc Nanocrystalline Solid Solution And Amorphous Phase In The Ti Ta Based Alloy By High Milling Energy 2021 6 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Mechanochemical Processing Of Ir O<Sub>2</Sub> Ta<Sub>2</Sub>O<Sub>5</Sub>: An Alternative Route For Synthesizing Ir And Ir(ta)o<Sub>2</Sub> Solid Solution 2021 0 artículo de investigación Boletin De La Sociedad Espanola De Ceramica Y Vidrio WoS Scopus
Evolution Of Face Centered Cubic Ti Alloys Transformation By X Ray Diffraction Profile Analysis In Mechanical Alloying 2021 1 artículo de investigación Metals WoS Scopus
Biodepression Of Copper Activated Pyrite With Acidithiobacillus Ferrooxidans In Flotation With Fresh And Seawater 2021 1 artículo de investigación Minerals WoS Scopus
Use Of The Fractal Dimension For Porosity Modification In Aluminum Foams Manufactured Using Space Holder Particles 2021 3 artículo de investigación WoS Scopus
A Tribological And Ion Released Research Of Ti Materials For Medical Devices 2022 4 artículo de investigación Materials WoS Scopus
Composite Materials Made Of Waste Tires And Polyurethane Resin: A Case Study Of Flexible Tiles Successfully Applied In Industry 2021 12 artículo de investigación Case Studies In Construction Materials WoS Scopus
Sustainability And Circular Economy Perspectives Of Materials For Thermoelectric Modules 2022 5 revisión Sustainability WoS Scopus
Particularities Of The Formation And Modification Of Si And Mg<Sub>2</Sub>Si As Second Phases In Casting Al Alloys: Use Of Shape Descriptors And Fractal Dimension 2022 2 revisión Transactions Of The Indian Institute Of Metals WoS Scopus
Heaps: A User Friendly Tool For The Design And Exploration Of High Entropy Alloys Based On Semi Empirical Parameters 2022 3 artículo de investigación Computer Physics Communications WoS Scopus
Organic Template Free Synthesis Of Mesoporous Zn O Microparticles By Sol Gel Method And Low Temperature Hydrothermal Treatment 2022 0 artículo de investigación Journal Of Nanomaterials WoS Scopus
Synthesis Of Nanostructured Carbon Derived From The Solid State Reaction Between Iron And Boron Carbide 2022 7 artículo de investigación Materials Chemistry And Physics WoS Scopus
An Overview Of The Interactions Between Reinforcements And Al Matrices With Si, Cu And Mg As Alloying Elements In Aluminum Matrix Composites: Case Of Oxide Reinforcements 2022 4 artículo de investigación Materials Research Ibero American #Journal Of Materials WoS Scopus
An Overview Of Highly Porous Titanium Processed Via Metal Injection Molding In Combination With The Space Holder Method 2022 3 revisión Metals WoS Scopus
In Situ Monitoring Of Dislocation Proliferation During Plastic Deformation Of 304 L Steel Using Ultrasound 2022 1 artículo de investigación Materials Science And Engineering A Structural Materials Properties Microstructure And Processing WoS Scopus
Influence Of Plasma Nitriding Treatment On The Micro Scale Abrasive Wear Behavior Of Aisi 4140 Steel 2022 0 artículo de investigación Materials Letters WoS Scopus
An Overview On The Identification And Characterization Of Cu Rich Second Phases In Casting Al Alloys 2022 0 artículo de investigación International #Journal Of Metalcasting WoS Scopus
Thermoelectric Generator Using Low Cost Thermoelectric Modules For Low Temperature Waste Heat Recovery 2023 0 artículo de investigación Sustainability WoS Scopus
Nonlinear Acoustic Characterization Of Heterogeneous Plasticity In Bent Aluminium Samples 2023 0 artículo de investigación Materials Science And Engineering A Structural Materials Properties Microstructure And Processing WoS Scopus
Analysis Of The Interactions Between Nonoxide Reinforcements And Al Si Cu Mg Matrices 2022 0 revisión Reviews On Advanced Materials Science WoS Scopus
Effect Of Sn Content On The Passivity Of Ti Ta Sn Alloys 2023 0 artículo de investigación Corrosion Science WoS Scopus
Phase Transformations And Porosity Formation For Cu Sn Alloys Over Solution Heat Treated 2023 0 artículo de investigación Materials Letters WoS Scopus
Design Of In Situ Metal Matrix Composites Produced By Powder Metallurgy A Critical Review 2022 0 revisión Metals WoS Scopus
Fabrication And Arc Erosion Behavior Of Ag Sn O<Sub>2</Sub> Zn O Electrical Contact Materials 2023 2 artículo de investigación Materials WoS Scopus
Improving Mechanical Properties And Antibacterial Response Of A/B Ternary Ti Ta Alloy Foams For Biomedical Uses 2023 0 artículo de investigación Journal Of Materials Research And Technology Jmr&T WoS Scopus
Computational Study Of The Influence Of α/β Phase Ratio And Porosity On The Elastic Modulus Of Ti Based Alloy Foams 2023 0 artículo de investigación Materials WoS Scopus
Computational Analysis Of The Graded Porosity Distribution On The Elastic Modulus Of Ti Foams 2023 0 artículo de investigación Materials Today Communications WoS Scopus
Microscopy And Microanalysis Of Electrochemical Assay Of Titanium Metallic Foam 2023 0 Microscopy And Microanalysis Scopus WoS
Sem And Eds Analysis Of Ti 13 Ta 1 Cu Alloy Obtained By Mechanical Alloying 2023 0 Microscopy And Microanalysis Scopus WoS
Hot Deformation Of Ultrafine Grained Ti C Reinforced Al Cr Fe Nb Mo Ti V Refractory High Entropy Alloys 2023 0 Scopus
High Entropy Alloys: A Review Of Their Performance As Promising Materials For Hydrogen And Molten Salt Storage 2023 0 revisión Reviews On Advanced Materials Science WoS Scopus
Simulation Of The Influence Of The Radial Graded Porosity Distribution On Elastic Modulus Of γ/β Phase Ti Based Alloy Foams For Bone Implant 2023 0 artículo de investigación Materials WoS Scopus
Study Of Nitrogen Effect On The Mechanical Alloying Process And Subsequent Heat Treatment Of Fe 14 Wt.% Mn Powders 2023 0 artículo de investigación Metallurgia Italiana WoS Scopus
Highly Porous Cp Ti Foams Manufactured With Powder Compaction, The Space Holder Method And Plasma Assisted Sintering For Biomedical Applications 2024 0 artículo de investigación Materials Letters WoS Scopus
Corrosion Properties Of Ti Nb Sn Alloys Prepared By Mechanical Alloying 2024 0 artículo de investigación Journal Of Materials Engineering And Performance WoS Scopus
A Review On Mechanical Alloying And Spark Plasma Sintering Of Refractory High Entropy Alloys: Challenges, Microstructures, And Mechanical Behavior 2024 0 revisión Journal Of Materials Research And Technology Jmr&T WoS Scopus
Microstructure And Constitutive Modeling Of An Ultrafine Grained Refractory High Entropy Alloy Fabricated By Powder Metallurgy 2024 0 artículo de investigación Journal Of Materials Research And Technology Jmr&T WoS Scopus
Acoustic Assessment Of Microstructural Deformation Mechanisms On A Cold Rolled Cu30 Zn Brass 2024 0 artículo de investigación Materials WoS Scopus
Effect Of Max Phase Ti2 Sn C Content On Microstructure, Mechanical Properties, And Friction Behavior Of Iron Based Self Lubricating Composites 2024 0 artículo de investigación Materials Letters WoS Scopus
Enhanced Fracture Toughness Of Wc Co Cr Thermally Sprayed Coatings By The Addition Of Ni Cr Fe Si Bc And Mo And Its Influence On Sliding Wear Behavior 2024 0 artículo de investigación Coatings WoS Scopus
Sag’s Overload Forecasting Using A Cnn Physical Informed Approach 2024 0 artículo de investigación Applied Sciences Basel WoS Scopus
Synthesis And Characterization Of Ti 13 Ta 6 Sn Foams Produced Using Mechanical Alloying, The Space Holder Method And Plasma Assisted Sintering 2024 0 artículo de investigación Metals WoS Scopus
High Entropy Alloys As An Alternative Binder To Improve Mechanical, Tribological, And Oxidation Properties Of Cermets 2024 0 artículo de investigación Materials And Design WoS Scopus
Kinetic Study Of Oxidation Of Ag Sn Zn Solid Solution Powders Via Hot Mechanochemical Processing 2024 0 artículo de investigación Materials WoS Scopus
Energy Transfer By Mechanical Alloying And Electrocatalytic Performance Of The As Sintered Self Supported High Entropy Alloy Fe Ni Co Cu Mo 2024 0 artículo de investigación Advanced Engineering Materials WoS Scopus

Listado de publicaciones, tipo de publicación, revista de la publicación y sus citas desde el años 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Palabras Clave




Palabra Clave #Pub
microstructure 40
mechanical alloying 33
mechanical-properties 30
behavior 17
powder metallurgy 17
x-ray diffraction 17
corrosion behavior 15
powders 12
model 11
porous titanium 11
evolution 10
system 10
titanium 10
fabrication 9
mechanical properties 9
metals 9
porosity 9
alloys 8
phase 8
ti 8
titanium-alloys 8
biomedical applications 7
deformation 7
foam 7
high-entropy alloys 7
resistance 7
solid-solution 7
wear 7
x-ray-diffraction 7
cheese 6
crystallite size 6
dislocations 6
heat treatment 6
implants 6
milk 6
size 6
space-holder 6
temperature 6
ti-based alloys 6
xrd 6
youngs modulus 6
alloy 5
composite 5
composites 5
conjugated linoleic-acid 5
copper 5
elastic modulus 5
electrodes 5
formation enthalpies 5
fractal 5
grain-size 5
magnesium 5
metallic foams 5
nacl 5
performance 5
refinement 5
sheep 5
al-si-cu-mg 4
aluminum 4
aluminum alloys 4
biocompatibility 4
bulk metallic glasses 4
electrical contact materials 4
energy 4
fatty acids 4
fe 4
growth 4
heat-treatment 4
hot pressing 4
meat 4
metals and alloys 4
mg 4
nb 4
nickel 4
porous electrode 4
powder 4
powder-metallurgy 4
quality 4
sem 4
simulation 4
space holder 4
strength 4
stress 4
surface modification 4
tensile properties 4
ti-6al-4v 4
transmission electron microscopy 4
al alloys 3
amorphous 3
amorphous phase 3
beef cattle 3
biomaterials 3
coatings 3
compression 3
copper alloys 3
corrosion-resistance 3
crystalline 3
cu 3
dairy-cows 3
design 3
dislocation density 3
electrochemical behavior 3
ewe 3
ewes 3
fcc titanium 3
fea 3
finite element analysis 3
goat 3
graphite 3
hardness 3
high-energy 3
hrtem 3
interface 3
leaching 3
line-profile analysis 3
management 3
mechanical activation 3
microstructural evolution 3
nanocrystalline 3
nanostructured materials 3
oil 3
phase transformation 3
phase-transformations 3
queso 3
sintering temperature 3
sliding wear 3
solid solution 3
stacking fault 3
strain 3
surface 3
surfaces 3
thermal-stability 3
thermodynamic modelling 3
ti-based alloy 3
titanium alloys 3
ultrasound 3
acidithiobacillus ferrooxidans 2
additions 2
adsorption 2
age-hardening behavior 2
aluminum foam 2
amorphization 2
amorphous-alloys 2
bimodal microstructure 2
birth-weight 2
carbon 2
carbon nanotubes 2
cell porous ti-6al-4v 2
ceramics 2
cermets 2
chalcopyrite 2
circular economy 2
cla content 2
climate change 2
climate-change 2
compaction 2
complex concentrated alloys 2
computational thermodynamics 2
contrast 2
copper based alloys 2
corrosion 2
cost-efficiency ratio 2
cu-cr-mo 2
damage assessment 2
degradation 2
density 2
dependence 2
diffraction 2
diffraction profile analysis 2
diffusion 2
dispersion 2
eds 2
elastic-constants 2
elastic-modulus 2
electrochemical 2
electrochemical-behavior 2
enthalpies 2
farming systems 2
farms 2
fatty-acid-composition 2
fcc 2
fe-mn-ni 2
flavor 2
flotation 2
foams 2
graded porosity 2
grazing systems 2
hank's solution 2
high-strength 2
hydrogen storage 2
hydrogen storage materials 2
idiazabal cheese 2
impedance 2
impedance response 2
implant 2
in-situ 2
joint implants 2
kinetics 2
lactating ewes 2
lamb 2
laves-phase 2
leche 2
life cycle 2
live weight 2
livestock management 2
livestock production 2
manganese 2
matrix 2
max phase 2
mechanical characterization 2
mechanism 2
metal foam 2
metal foams 2
metal injection molding 2
metallic foam 2
metallic glasses 2
metallurgy 2
mg content 2
microhardness 2
microstructural characterization 2
milk-fat 2
milling time 2
modulus 2
n)-based cermets 2
nanocomposite 2
nanocrystalline solid-solution 2
ni 2
nonlinear acoustics 2
olive cake 2
olive oil 2
oxide 2
parameters 2
particles 2
phase-formation 2
phase-stability 2
phases 2
plasma sintering 2
plasticity 2
polyurethane 2
power-generation 2
profitability 2
pyrite 2
radial graded porosity 2
raman-spectroscopy 2
reinforcement 2
resonant ultrasound spectroscopy 2
rich 2
rubber tiles 2
second phases 2
selective separation 2
sensory characteristics 2
shape 2
sheep milk 2
silicon 2
silicon-carbide 2
simulation models 2
size-distribution 2
sluggish diffusion 2
spectroscopy 2
stability 2
stacking-fault energy 2
stacking-faults 2
supplementation 2
sustainability 2
systems 2
ternary 2
thermal analysis 2
thermodynamic model 2
thermodynamic modeling 2
thermodynamic properties 2
thermodynamics 2
thermoelectric modules 2
thiobacillus-ferrooxidans 2
ti-6al-4v alloy 2
ti(c 2
ti2aln 2
toxicity 2
transformation 2
tribology 2
twinning 2
typology 2
waste tire rubber 2
wear behavior 2
wear-resistance 2
zr 2
1st-principles 1
2024 aluminum-alloy 1
2d graphite 1
3d metals 1
3rd-order elastic-constants 1
abrasive wear 1
absorption 1
acid 1
ácidos grasos 1
ácidos grasos n-3 1
acoustic-resonance 1
acoustics 1
activation energy 1
adhesion 1
adi 1
advanced materials 1
ag-cdo 1
ag-cu 1
ag-sno2-zno composites 1
ag-zn alloys 1
ag-zno 1
ag−zno 1
aging behavior 1
al 1
al-al2o3 syntactic foams 1
al-ti 1
al4c3 1
alloy foams 1
alperujo 1
alpha-ti 1
alumina-forming alloys 1
aluminium 1
amorphous alloys 1
amorphous materials 1
amorphous metals 1
amorphous precursor 1
amorphous structure 1
animal performance 1
annual pasture 1
anodes 1
antibacterial activity 1
antimicrobial properties 1
aqueous-solutions 1
arsenic 1
atomic volume 1
attenuation 1
attrition 1
austempered ductile cast iron 1
awassi lambs 1
bacterial adhesion 1
ball cratering 1
batteries 1
bcc 1
behaviors 1
benchmarking 1
beta-ti 1
binary-system 1
binder system 1
biological response 1
biomaterial 1
biomedical implants 1
body composition 1
body condition score 1
bone ingrowth 1
boron-carbide 1
bovinos de carne 1
brass 1
breed 1
bulk metallic glass 1
bulk metallic-glass 1
by-products 1
carbide 1
carbide-derived carbon 1
carbon content 1
carbon footprint 1
carbon microalloyed steel 1
carbothermic reduction 1
carcass characteristics 1
carcass quality 1
carcass traits 1
casting alloys 1
catalytic material 1
cell morphology 1
cells 1
cellular metals 1
cemented carbide 1
cemented carbides 1
census data 1
centrifugal field 1
ceramic composites 1
character 1
chemical composition 1
cholesterol 1
cnt 1
co 1
coefficient 1
coefficient of friction 1
cof 1
coherent x-ray scattering 1
cold compaction 1
cold rolled 1
complex composition alloys 1
composición 1
composite metal foams 1
compressive properties 1
condensed matter 1
constitutive analysis 1
constitutive equation 1
consumo 1
consumption 1
contact 1
contact stiffness 1
convolutional neural networks (cnns) 1
copper activation 1
copper foams 1
copper-based alloys 1
coronary-heart-disease 1
corporal 1
corrosion resistance 1
corrosion resistant 1
cortical bone 1
cost 1
cost function 1
country-of-origin 1
covid-19 1
cr 1
creep 1
criterion 1
crop yield 1
cryogenic hardening 1
crystalline defects 1
crystallization behavior 1
cu metal matrix composites 1
cu powders 1
cu-based alloys 1
cu-based composites 1
cu-cr 1
cu-mg alloys 1
cu-zr binary 1
cufes(2) 1
cufes2 1
curves 1
cytotoxicity 1
dairy sheep 1
damage evolution 1
de levie model 1
defect 1
defects 1
deformation-behavior 1
delamination fronts 1
dem 1
dense 1
densities 1
deposition 1
diet 1
diets 1
diferenciación 1
differentiation 1
discrete element method 1
dislocation contrast 1
dislocation proliferation 1
disorder 1
dispersion-strengthened copper 1
dissolution 1
dissolved air flotation 1
drinking-water 1
dry olive cake 1
dual-phase steels 1
dynamic recrystallization behavior 1
dynamics 1
eccs 1
econometric model 1
econometric models 1
electrical conductivity 1
electrical contact material 1
electrical current 1
electricity-generation 1
electrocatalysis 1
electrochemical properties 1
electrochemical techniques 1
elements 1
end 1
energy-storage 1
environment 1
enzymatic composition 1
equiatomic alloy 1
eutectic modification 1
eutectic si 1
evapotranspiration 1
ewes raw-milk 1
extended solid solubility 1
extension 1
extensive 1
extensive systems 1
extruded linseed 1
extruido de linaza 1
face-centered cubic 1
face-centred cubic 1
farmhouse chilean cheeses 1
fasting heat-production 1
fatigue behavior 1
fatty acid 1
fcc phase 1
fe contamination 1
fe-based alloys 1
fe-mn alloys 1
fe/as ratio 1
fem 1
ferric hydroxide 1
film 1
film thickness 1
finishing 1
finite element method simulation 1
finite elements 1
flavor compounds 1
floating die 1
flow behavior 1
flow-stress 1
food 1
footprint 1
forages 1
fractals 1
fracture 1
fracture toughness 1
france 1
free fatty-acids 1
free-energy 1
freshwater 1
friction 1
future 1
gender 1
geometric model 1
gibbs free energy 1
glass 1
global energy-consumption 1
goat systems 1
grain -boundary sliding 1
grain growth 1
grain growth exponent 1
grain-boundary sliding 1
grain-size changes 1
graphene 1
graphene nanosheets 1
grassland simulation models 1
gravitational-field 1
greenhouse-gas emissions 1
health 1
heart-disease 1
heat 1
heat -treatment 1
heat-transfer fluids 1
heating rate 1
hierarchical 1
high -entropy alloys 1
high-efficiency 1
high-performance 1
high-temperature deformation 1
high-temperature properties 1
highly porous titanium 1
hot deformation-behavior 1
hot mechanochemical processing 1
hvof 1
hydriding and dehydriding processes 1
hydriding properties 1
hydrogen absorbing materials 1
hydrogen absorption 1
hydrogen storage properties 1
hydrometallurgy 1
hydroxide 1
in situ 1
in-situ testing of steels 1
in-vitro 1
in-vivo 1
induced phase-transformation 1
infiltration 1
inhibitors 1
intensification 1
interfaces 1
interfacial reaction 1
interfacial reactions 1
intermetallics 1
internal-friction 1
involvement 1
ion release 1
iron 1
isothermal annealing treat-ments 1
isothermal annealing treatments 1
kinetic study 1
kinetic-analysis 1
kinetics of strain-induced martensite 1
lactation 1
lamb rennet paste 1
lambs 1
land use 1
lani5 alloy 1
layers 1
lessons 1
lightweight materials 1
lipolysis 1
liquid 1
longissimus-thoracis 1
lotus-corniculatus 1
low-cost 1
m(n+1)ax(n) phases 1
machine learning 1
magnetic-properties 1
manufacture 1
market 1
materials characterization 1
meat quality 1
mechanical 1
mechanical activation process 1
mechanical milling 1
mechanical testing 1
mechanochemical synthesis 1
mediterranean 1
mediterranean sheep 1
mesophytic grasslands 1
metabolic profile 1
metal injection moulding 1
metal matrix composites 1
metal-hydrides 1
metal-oxides 1
metallic glass 1
metallic implants 1
mg foams 1
mg2ni 1
mg2ni-h system 1
mg2si 1
mg50ni50 1
mgni alloy 1
microstructural characteristics 1
microstructure evolution 1
microstructure prediction 1
microstructure properties 1
microstructures 1
miedema model 1
miedema's models 1
milk composition sheep value-added 1
milk-production 1
milk-products 1
milling 1
milling energies 1
mills 1
mining industry 1
mixtures 1
mo 1
mo addition 1
modeling and simulation 1
modelling and simulation 1
modelos de simulación 1
modelos de simulación de praderas 1
molding 1
molten salt 1
morphology 1
multi-channel cnn 1
n-3 1
n-3 fatty acids 1
nano 1
nano-crystalline materials 1
nanocomposites 1
nanocrystalline fe 1
nanocrystalline layer 1
nanocrystalline materials 1
nanocrystalline metals 1
nanoindentation 1
nanoparticles 1
nanosheets 1
nanostructure 1
nb-ta-zr 1
neural-networks 1
neutron-diffraction 1
nicrfesibc 1
niobium 1
nitrate salts 1
nitrides 1
nitriding 1
nitrogen 1
non-ferrous alloys 1
non-metallic ores 1
nondestructive assessment 1
nondestructive evaluation 1
nondestructive testing 1
nonlinear parameter 1
nonlinear ultrasonic measurement 1
nucleation 1
nutritional regulation 1
oleic-acid 1
open-cell foams 1
open-source software 1
optimization 1
organ size 1
organic dairy sheep 1
organic production 1
oveja 1
overload prediction 1
ovine milk 1
ovino 1
ovinos 1
oxidation 1
oxidation behavior 1
oxide-film 1
oxides 1
packing 1
particle distribution 1
particle-size 1
passivity 1
pastizales mesofíticos 1
pastoreo 1
pasture 1
ph 1
phase evolution 1
phase segregation 1
phase-transformation 1
photocatalytic activity 1
physics-informed neural networks (pinns) 1
planetary ball mill 1
plasma 1
plasma processing 1
plastic-deformation 1
policy 1
polyacrylonitrile 1
polycrystals 1
polymer 1
polyurethane resin 1
pore characteristics 1
pore-size 1
post-discharge nitriding 1
potentiodynamic test 1
powder diffraction 1
powder methods 1
powder synthesis 1
precipitation 1
precursor 1
prediction 1
predictive maintenance 1
preoxidation 1
probe 1
productive structure 1
profile 1
profile analysis 1
pure titanium 1
purification 1
pyrolysis 1
radiata pine 1
raman 1
random pores 1
range 1
rapid solidification 1
ray-diffraction analysis 1
reaction kinetics 1
reactive sintered (ti 1
recrystallization 1
recycling process 1
removal 1
replication 1
retained austenite 1
rheological behavior 1
rietveld 1
rietveld analysis 1
rietveld method 1
rietveld refinement 1
rietveld refinement analysis 1
risk 1
rubber 1
rumiantes menores 1
ruminal fermentation 1
rutile tio2 1
sabor 1
saline 1
scaffolds 1
scattering 1
scratch test 1
seawater 1
second harmonic generation 1
sedimentation 1
self-lubricating composite 1
self-lubricating composites 1
self-lubricating steel 1
self-lubricating steels 1
semi-autogenous grinding (sag) mills 1
semi-empirical parameters 1
severe plastic-deformation 1
shear bands 1
sheep meat 1
sheep production 1
sheep-cereal systems 1
si alloys 1
silver 1
silver nanoparticles 1
simulated body-fluid 1
simulation model 1
simulation modeling 1
single-crystal 1
sintering 1
sintering-dissolution process 1
size distribution 1
sized al2o3 particles 1
slaughter weight 1
small farms 1
small ruminant 1
sn content 1
sn-nb alloy 1
solid solubility 1
solid solubility extension 1
solid-lubrication 1
solid-phase microextraction 1
solid-solution phase 1
solid-state 1
solid-state reaction 1
solid-state reactions 1
solid-state synthesis 1
solution heat-treatment 1
sorption 1
sorption properties 1
sound 1
sound pressure 1
south-central spain 1
soybean oil 1
space holder technique 1
space-holder technique 1
spain 1
spark plasma sintering 1
sphalerite 1
stacking-fault probability 1
stainless-steels 1
staphylococcus aureus 1
state 1
static recrystallization 1
stearoyl-coa desaturase 1
steel 1
steel powders 1
storage 1
storage properties 1
strain-hardening behavior 1
strains 1
streaming potential 1
stress-strain 1
structural characteristics 1
structural-analysis 1
subsequent heat-treatment 1
substitutional atoms 1
suckling lambs 1
sunflower oil 1
supercooled liquid 1
suplementación 1
supplements 1
surface characterization 1
surface durability 1
surface-morphology 1
surface-roughness 1
surface-tension 1
survival 1
syntactic foam 1
syntactic foams 1
t-hr-t 1
ta 1
technical efficiency 1
technologies 1
tem 1
temperature oxidation behavior 1
tensile 1
texture 1
texture evolution 1
thermal properties 1
thermal stability 1
thermal-conductivity 1
thermodynamic analysis 1
thermoelectric generator 1
thermogravimetry 1
ti alloy 1
ti alloys 1
ti foams 1
ti-6al-4v foams 1
ti-6al-7nb 1
ti-6al-7nb alloy 1
ti-6al–4v 1
ti-al 1
ti-based alloy foams 1
ti-beta alloy 1
ti-nb based alloys 1
ti-nb-ta-mn alloys 1
ti-si alloys 1
ti-ta-sn alloy 1
ti-ta-sn alloys 1
ti-tib composites 1
ti-β alloy 1
tib2-based cermets 1
tibw/ti6al4v composites 1
tio2 nanotubes 1
titanium diboride 1
titanium foams 1
titanium matrix 1
titanium surfaces 1
titanium-alloy 1
tool wear 1
transformations 1
transition 1
tribological behavior 1
tribological characterization 1
triglyceride 1
turbostratic graphite 1
twip steel 1
typologies 1
ultrafine-grained 1
ultrasonic-waves 1
valor agregado 1
vegetable-oils 1
volatile compounds 1
volatiles 1
walled carbon nanotubes 1
waste heat-recovery 1
waste tires 1
water 1
water footprint 1
wccocr 1
wear characteristics 1
wettability 1
whole-farm production 1
winter supplementation 1
x ray diffraction 1
x-ray analysis 1
x-ray diffraction (xrd) 1
x-ray tomography 1
x=0 1
yield 1
young modulus 1
zn-ag alloys 1

Listado ordenado de keywords declarados por el autor en publicaciones desde el año 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.


Descargar Descarga los datos de esta página (formato JSON).
Descargar Descarga los datos de esta página como un archivo Excel.