Colección SciELO Chile

Departamento Gestión de Conocimiento, Monitoreo y Prospección
Consultas o comentarios: productividad@anid.cl



Firmas del autor
Nombre TUNINETTI, VICTOR
Género Hombre
Área Principal WOS Materials Science, Multidisciplinary; Metallurgy & Metallurgical Engineering; Mechanics;
Afiliación Principal Universidad De La Frontera
ORCID 0000-0002-2808-0415

Publicaciones en Chile

Citas Totales

Afiliaciones Chilenas

Periodo registrado: 2008 - 2024
×

¿Quieres unificar este perfil a otros que correspondan al mismo autor? Recuerda, la unificación de perfiles permite fusionar las publicaciones, asociadas a distintas firmas, en una única firma llamada "base".
Esta operación no elimina las firmas de autor originales de una publicación. Tampoco altera otras bases de datos que no sean DataCiencia.

  • Paso 1: Pincha el botón de "Unificar Perfiles"
    • - Verás un listado de firmas en las cuales coincide el primer apellido y la primera letra del nombre. Costado izquierdo de la pantalla ("Sugerencias").
    • - Ese listado está acompañado de información sobre algunas publicaciones y afiliaciones.
  • Paso 2: Selecciona una firma como "Base". Escoge aquella firma más completa.
    • - Esta firma agrupará las publicaciones de las otras firmas.
    • - Por defecto, la primera firma del listado es la que contiene más publicaciones.
  • Paso 3: Selecciona una o varias firmas como "Agrupar".
    • - Las publicaciones y afiliaciones de estas firmas se añadirán a la firma base.
  • Paso 4: Ingresa tu correo electrónico.
    • - Este es un método de validación obligatorio.
    • - Solo una solicitud por correo electrónico.
  • Paso 5: Pincha el botón "Enviar solicitud".
    • - Recibirás un correo por tu solicitud la cual estará pendiente de evaluación.
    • - Recibirás un segundo correo cuando tu solicitud sea procesada de forma completa, parcial, o rechazada.


Continuar

* ¿Por qué es necesario unificar perfiles? Muchas veces las publicaciones vienen desde el origen (WoS, Scopus o SciELO) vinculadas a distintas firmas de autor a pesar de corresponder a las mismas personas.


Disciplinas de Investigación





Muestra la distribución de la producción WoS, Scopus y SciELO del autor.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

WOS #Pub
Materials Science, Multidisciplinary 17
Metallurgy & Metallurgical Engineering 8
Mechanics 5
Engineering, Manufacturing 5
Automation & Control Systems 3
Energy & Fuels 2
Mathematics, Interdisciplinary Applications 1
Green & Sustainable Science & Technology 1
Crystallography 1
Optics 1
Polymer Science 1
Engineering, Environmental 1
Materials Science, Composites 1
Materials Science, Paper & Wood 1
Physics, Applied 1
Engineering, Industrial 1
Chemistry, Physical 1
Multidisciplinary Sciences 1
Environmental Sciences 1
Mathematics, Applied 1
Computer Science, Interdisciplinary Applications 1
Forestry 1
Scopus #Pub
Mechanical Engineering 4
Materials Science (All) 3
Civil And Structural Engineering 2
Architecture 1
Building And Construction 1
Waste Management And Disposal 1
Aerospace Engineering 1
Physics And Astronomy (All) 1
Automotive Engineering 1
Fluid Flow And Transfer Processes 1
SciELO #Pub

Bases de Datos



Muestra la distribución de las publicaciones del autor en las distintas bases de datos* (WoS, Scopus y SciELO-Chile).

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

* Una misma publicación puede pertenecer a más de una base de datos.

Base de Datos #Publicaciones
WOS 39
Scopus 41
SciELO 0

Coautores



Autor Género # Pub
PALACIO, DANIEL Hombre 1
PINCHEIRA, GONZALO Hombre 10
ROJAS, DAVID Hombre 3
JARAMILLO, A. F. Hombre 4
DIEZ, EDUARDO Hombre 1
CIUDAD, GUSTAVO A. Hombre 2
SALAS-BURGOS, ALEXIS Hombre 6
GARCIA-HERRERA, CLAUDIO MOISES Hombre 3
HINOJOSA, JORGE Hombre 1
FLORES-VEGA, PAULO ANDRES Hombre 6
CANALES, CRISTIAN Hombre 2
CELENTANO, DIEGO JAVIER Hombre 1
HUNTER, RENATO Hombre 1
AVILA-BARRERA, ANDRES IGNACIO Hombre 1
MEDINA, C. Hombre 14
LOPEZ, MANUEL Hombre 1
CASTILLO, ROBERTO Hombre 1
MEDINA-AREVALO, MARIA CONSUELO Mujer 1
RAMIREZ, JESUS Hombre 2
DIAZ-GOMEZ, ANDRES Hombre 1
VALENZUELA, MARIAN Hombre 10
ONATE SOTO, ANGELO Hombre 12
ALZUGARAY-FRANZ, RICARDO Hombre 1
GONZALEZ, JORGE Hombre 1
VIAL, J. T. - 1
BERRIO, M. E. Mujer 1
VALDIVIA, IGNACIO Hombre 1
GARRIDO, CESAR Hombre 5
SEPÚLVEDA, HÉCTOR Hombre 4
SALAS, ALEXIS - 1
HERMOSILLA, RODOLFO Hombre 2
DE LA FUENTE, ANDRÉS Hombre 2
SEPÚLVEDA, JOAQUÍN Hombre 2
ESCUDERO, BENJAMÍN Hombre 3
MORALES, JORGE Hombre 1
BUSTOS, FLAVIA - 1
MARTEL, S. - 1
CÁRDENAS-RAMÍREZ, JUAN PABLO Hombre 2
TORRES, ENRIQUE Hombre 1
OLAVE, DIEGO - 1
SANHUEZA, JUAN PABLO Hombre 3
MELENDREZ, MANUEL Hombre 8
LEIVA, JORGE Hombre 1
RILLING, SAMUEL - 1
RÍOS, IGNACIO - 1
GÓMEZ, ÁLVARO - 1
CASTILLO, RODRIGO Hombre 1
FORCAEL, DIEGO - 1
MARTINEZ, ALEX - 1
DUENA, GLEYDIS - 1
WACKERLING, DIEGO - 1
SALVO, CHRISTOPHER Hombre 1
SAUCEDA, SERGIO Hombre 1
ARANDA, PEDRO MIGUEL Hombre 1
TORO, SEBASTIAN ANDRES Hombre 1
LANDEROS, FELIPE Hombre 1
OSORIO, LIOMNIS - 1
MORENO, MAILYN - 1
MEDINA, CARLOS - 1
PINCHEIRA, GONZALO - 1
SEPULVEDA, HECTOR - 1
BEECHER, CARLOS - 1
ROJAS-ULLOA, C. Hombre 3
RÍOS, IGNACIO - 1


Muestra un listado ordenado de los co-autores del autor en publicaciones desde el año 2008.

La gráfica adjunta, muestra la distribución de los co-autores por género.

Es importante mencionar que si no se encuentra el nombre del autor en el diccionario (que está en permanente actualización) este no se contabiliza y su género es Indeterminado.

Porcentaje Indeterminados: 29.7 % del total de co-autores

Afiliaciones





Muestra la distribución de las afiliaciones del autor de acuerdo a su producción desde el año 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Institución # Pub
Universidad De La Frontera 40
Universidad De Concepción 1
Distribuidora Cummins Chile Sa 1
Universite De Liege 1
Département Argenco 1
Distribuidora Cummins Chile S.A. 1

Métricas Incites®



Año Firma Institución (Incites asoc.) H Index Average Percentile Impact Citation Impact Relative World Impact Journal Normalized Citation Impact Category Normalized Citation Percentage Cited Percentage Top 1 Percentage Top 10 Percentage Journal Q1 Percentage Journal Q2 Percentage Journal Q3 Percentage Journal Q4
2019 Tuninetti, V. Universidad de La Frontera 1.0 8.8 3.0 0.3 2.4 3.4 100.0 0.0 100.0 0.0 0.0 0.0 0.0
2019 Tuninetti, Victor Universidad de Concepcion 1.0 23.7 21.0 2.4 0.9 1.1 100.0 0.0 0.0 100.0 0.0 0.0 0.0

Muestra una serie de métricas Incites para el autor según el año.

Las métricas incites están asociadas a una firma de autor y una institución. Por esa razón, se pueden desplegar en más de una fila por autor.

Publicaciones/Citas en Chile por Año



Número de publicaciones por año para el autor seleccionado.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Número de citas recibidas por las publicaciones del autor seleccionado según año de publicación.

Liderazgo



Muestra la distribución de las publicaciones del autor según su liderazgo* en estas.
* Liderazgo se define porque el autor es primer autor o autor de correspondencia en las publicaciones.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Muestra el número de publicaciones lideradas* y no lideradas por el autor en cada año.
* Liderazgo se define porque el autor es primer autor o autor de correspondencia en las publicaciones.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Origen de Citas Identificadas



Muestra la distribución de países cuyos autores citan las publicaciones del Autor consultado.

Citas identificadas: Las citas provienen de documentos incluidos en la base de datos de DATACIENCIA

Citas Identificadas: 6.34 %
Citas No-identificadas: 93.66 %

Muestra la distribución de instituciones nacionales o extranjeras cuyos autores citan las publicaciones del Autor consultado.

Citas identificadas: Las citas provienen de documentos incluidos en la base de datos de DATACIENCIA

Citas Identificadas: 6.34 %
Citas No-identificadas: 93.66 %

Publicaciones en Chile



Título Año Citas Tipo Revista Indexada
Impact Of Distortional Hardening And The Strength Differential Effect On The Prediction Of Large Deformation Behavior Of The Ti6 Al4 V Alloy 2019 10 artículo de investigación Meccanica WoS Scopus
Modeling The Ductile Fracture And The Plastic Anisotropy Of Dc01 Steel At Room Temperature And Low Strain Rates 2016 7 proceedings paper Journal Of Physics: Conference Series WoS Scopus
Accurate Stress Computation In Plane Strain Tensile Tests For Sheet Metal Using Experimental Data 2010 37 artículo de investigación Journal Of Materials Processing Technology WoS Scopus
Experimental Characterization Of The Compressive Mechanical Behaviour Of Ti6 Al4 V Alloy At Constant Strain Rates Over The Full Elastoplastic Range 2020 11 artículo de investigación International #Journal Of Material Forming WoS Scopus
Mechanical Behavior Of Materials With A Compact Hexagonal Structure Obtained By An Advanced Identification Strategy Of Hcp Material, Az31 B H24 2020 4 artículo de investigación Frattura Ed Integrita Strutturale WoS Scopus
Sensitivity Analysis In The Modelling Of A High Speed Steel Thin Wall Produced By Directed Energy Deposition 2020 18 artículo de investigación Metals WoS Scopus
Experimental Correlation Of Mechanical Properties Of The Ti 6 Al 4 V Alloy At Different Length Scales 2021 13 artículo de investigación Metals WoS Scopus
Efficient Temperature Dependence Of Parameters For Thermo Mechanical Finite Element Modeling Of Alloy 230 2021 7 artículo de investigación European Journal Of Mechanics A Solids WoS Scopus
Root Cause And Vibration Analysis To Increase Veneer Manufacturing Process Efficiency: A Case Study On An Industrial Peeling Lathe 2021 0 artículo de investigación European #Journal Of Wood And Wood Products WoS Scopus
Ultrafast Carbon Nanotubes Growth On Recycled Carbon Fibers And Their Evaluation On Interfacial Shear Strength In Reinforced Composites 2021 10 artículo de investigación Scientific Reports WoS Scopus
Nanomechanical Characterization Of The Deformation Response Of Orthotropic Ti 6 Al 4 V 2021 5 artículo de investigación Advanced Engineering Materials WoS Scopus
Design Of An Auxetic Cellular Structure With Different Elastic Properties In Its Three Orthogonal Directions 2021 3 artículo de investigación Proceedings Of The Institution Of Mechanical Engineers Part L Journal Of Materials Design And Applications WoS Scopus
Identification And Validation Of An Extended Stewart Cazacu Micromechanics Damage Model Applied To Ti 6 Al 4 V Specimens Exhibiting Positive Stress Triaxialities 2021 3 artículo de investigación Proceedings Of The Institution Of Mechanical Engineers Part L Journal Of Materials Design And Applications WoS Scopus
Numerical Prediction Of Failure In Unidirectional Fiber Reinforced Composite 2021 2 artículo de investigación International #Journal Of Applied Mechanics WoS Scopus
Design And Characterization Of Asymmetric Cell Structure Of Auxetic Material For Predictable Directional Mechanical Response 2022 6 artículo de investigación Materials WoS Scopus
Effect Of 0.5% Cnt Reinforcement Of A Glass Fiber Composite On Strength And Cyclic Damage Induced By Transverse And Out Of Plane Compressive Loads 2022 1 artículo de investigación Journal Of Composite Materials WoS Scopus
Evaluation Of The Orthotropic Behavior In An Auxetic Structure Based On A Novel Design Parameter Of A Square Cell With Re Entrant Struts 2022 0 artículo de investigación Polymers WoS Scopus
Dynamic Numerical Prediction Of Plasticity And Damage In A Turbofan Blade Containment Test 2022 1 artículo de investigación Proceedings Of The Institution Of Mechanical Engineers Part L Journal Of Materials Design And Applications WoS Scopus
Influence Stacking Sequence And Heat Treatments On The Out Of Plane Mechanical Properties Of 3 D Printed Fiberglass Reinforced Thermoplastics 2023 0 artículo de investigación International Journal Of Advanced Manufacturing Technology WoS Scopus
Computational Comparison Of Performance Of Different Steel Plate Shear Yielding Dampers 2023 1 artículo de investigación Buildings WoS Scopus
Quantifying The Influence Of Reinforcement Architecture On The Planar Mechanical Properties Of 3 D Printed Continuous Fiber Reinforced Thermoplastic Composites 2023 0 artículo de investigación International Journal Of Advanced Manufacturing Technology WoS Scopus
Optimizing Laser Power Of Directed Energy Deposition Process For Homogeneous Aisi M4 Steel Microstructure 2023 2 artículo de investigación Optics And Laser Technology WoS Scopus
Towards Recycling Of Waste Carbon Fiber: Strength, Morphology And Structural Features Of Recovered Carbon Fibers 2023 0 artículo de investigación Waste Management WoS Scopus
Supervised Machine Learning Based Multi Class Phase Prediction In High Entropy Alloys Using Robust Databases 2023 0 artículo de investigación Journal Of Alloys And Compounds WoS Scopus
Accurate Numerical Prediction Of Ductile Fracture And Micromechanical Damage Evolution For Ti6 Al4 V Alloy 2023 0 artículo de investigación Computational Mechanics WoS Scopus
Exploring The Impact Of Cooling Rate On Microstructural Features, Mechanical Properties, And Corrosion Resistance Of A Novel Nb Stabilized Super Duplex Stainless Steel In Shielded Metal Arc Welding 2023 0 artículo de investigación Crystals WoS Scopus
Ce Bs With Grc: Fabrication, Characterization, Modeling, And Correlation With Microstructural Fracture Features 2023 0 artículo de investigación Materials Today Communications WoS Scopus
Characterization Approaches Affect Asymmetric Load Predictions Of Hexagonal Close Packed Alloy 2023 1 artículo de investigación Journal Of Materials Research And Technology Jmr&T WoS Scopus
Optimized Infill Density Through Topological Optimization Increases Strength Of Additively Manufactured Porous Polylactic Acid 2023 0 artículo de investigación International Journal Of Advanced Manufacturing Technology WoS Scopus
Assessing Feed Forward Backpropagation Artificial Neural Networks For Strain Rate Sensitive Mechanical Modeling 2024 0 artículo de investigación Materials WoS Scopus
Sigma Phase Stabilization By Nb Doping In A New High Entropy Alloy In The Fe Cr Mn Ni Cu System: A Study Of Phase Prediction And Nanomechanical Response 2024 0 artículo de investigación Metals WoS Scopus
Implementation Of A Modified Graham Walles Viscosity Function Within A Chaboche Viscoplastic Constitutive Model 2024 0 artículo de investigación Computers & Mathematics With Applications WoS Scopus
Hybrid Numerical Experimental Strategy For Damage Characterization Of Sae 1045 Steel 2023 0 artículo de investigación European Journal Of Mechanics A Solids WoS Scopus
A Metaheuristic Based Method For Photovoltaic Temperature Computation Under Tropical Conditions 2024 0 artículo de investigación Solar Energy WoS Scopus
Impact Of Boundary Parameters Accuracy On Modeling Of Directed Energy Deposition Thermal Field 2024 0 artículo de investigación Metals WoS Scopus
Towards The Development Of Performance Efficient Compressed Earth Blocks From Industrial And Agro Industrial By Products 2024 0 artículo de investigación Renewable & Sustainable Energy Reviews WoS Scopus
Efficient Thermo Mechanical Modelling Of Cyclic Loading With Chaboche Type Constitutive Law Coupled With Damage 2024 0 Lecture Notes In Mechanical Engineering Scopus WoS
Computational Mechanics For Turbofan Engine Blade Containment Testing: Fan Case Design And Blade Impact Dynamics By Finite Element Simulations 2024 0 artículo de investigación WoS Scopus
A Combined Experimental And Numerical Calibration Approach For Modeling The Performance Of Aerospace Grade Titanium Alloy Products 2024 0 artículo de investigación WoS Scopus
Microstructure Evolution Of Incoloy 800 H In Industrial Environment And Correlation With Creep Mechanisms From Literature 2024 0 artículo de investigación Materials At High Temperatures WoS Scopus
Challenges Of Compression Test Simulations Of A Resin Filled Auxetic Polylactic Acid Structure 2024 0 Lecture Notes In Civil Engineering Scopus WoS

Listado de publicaciones, tipo de publicación, revista de la publicación y sus citas desde el años 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.

Palabras Clave




Palabra Clave #Pub
behavior 11
mechanical-behavior 7
damage 6
finite element modeling 6
anisotropy 5
additive manufacturing 4
model 4
performance 4
plasticity 4
strain rates 4
3d printing 3
auxetic structures 3
cellular structures 3
composites 3
constitutive model 3
design 3
evolution 3
fracture-toughness 3
lattice structures 3
mechanical characterization 3
plastic anisotropy 3
prediction 3
steel 3
strain rate 3
strength 3
tension–compression asymmetry 3
titanium alloys 3
yield criterion 3
alloy 2
blade containment test 2
ceb 2
compression 2
compression asymmetry 2
coupled damage law 2
cpb06 yield criterion 2
creep micromechanics 2
deformation 2
directed energy deposition 2
ductile fracture 2
elastic properties 2
energy-absorption 2
equations 2
fabrication 2
fatigue 2
fibers 2
foam structures 2
fused filament fabrication 2
gurson model 2
homogenization 2
impact 2
johnson-cook plasticity 2
laser 2
low-cycle fatigue 2
machine learning 2
mechanical properties 2
mechanical-properties 2
metamaterials 2
negative poissons ratio 2
phase prediction 2
plastic deformation 2
polymer composites 2
representation 2
sigma phase 2
simulation 2
stability 2
stiffness 2
stress 2
temperature 2
tension 2
tension-compression asymmetry 2
tension&#8211 2
ti-6al-4v alloy 2
titanium 2
validation 2
void growth 2
adobe 1
aerospace components 1
agro-industrial by-product 1
alloy 230 1
alloy 800h 1
alloys 1
arc-erosion behavior 1
artificial neural network 1
austenitic ni-based alloy 1
auxetic materials 1
ballistic penetration resistance 1
berkovich 1
blocks 1
calibration methods 1
carbon fibers 1
carbon nanotube 1
cazacu yield criterion 1
cement 1
chaboche model 1
chemical analysis 1
chemistry 1
coalescence 1
cocrcufeni 1
compressed earth blocks 1
compression tests 1
compressive strength 1
constant strain rate test 1
construction materials 1
contact 1
continuous carbon 1
continuous reinforcement 1
continuum damage mechanics 1
cooling rates 1
copper 1
corrosion 1
corrugated sample 1
coupled damage 1
cr 1
crack density 1
crack formation 1
crack-propagation 1
cracking 1
creep 1
creep curves 1
creep mechanism transition 1
crest factor 1
criteria 1
criterion 1
cycle jump 1
cyclic loading 1
cyclic loadings 1
cyclic viscoplasticity 1
damage evolution 1
damage response 1
ded additive process 1
defects 1
deformation-behavior 1
digital image correlation 1
distortion 1
distortional hardening 1
dual-material auxetics 1
durability 1
elastic-plastic torsion 1
electrical contact materials 1
elements 1
energy 1
energy absorption 1
epoxy composites 1
failure 1
failure criteria 1
failure initiation 1
fan-blade 1
fatigue behavior 1
fbo 1
fem 1
fem-dbem approach 1
fiber reinforced composite 1
finite element method 1
finite element simulation 1
finite-element-analysis 1
flows 1
formability 1
fracture 1
geometry 1
hardening–softening behavior 1
hcp 1
hcp material 1
heat input 1
heat-exchanger 1
high entropy alloys 1
high-entropy alloys 1
homogeneity 1
hysteretic behavior 1
identification 1
identification strategy 1
incoloy 800h 1
interbundle failure 1
interfacial dislocation networks 1
interlaminar strength 1
intermetallics prediction 1
johnson-cook 1
johnson-cook law 1
johnson-cook model 1
johnson–cook 1
johnson–cook law 1
joints 1
laminates 1
laws 1
load-bearing capacity 1
log soaking 1
m4 steel 1
machine 1
magnesium 1
magnesium alloy 1
material modeling 1
mechanical behavior 1
mechanical response 1
melt pool size 1
metallic powder layer 1
metallic yielding damper 1
micromechanics 1
micromechanics damage model 1
microstructure 1
microstructure evolution 1
modal-analysis 1
model parameters 1
modeling 1
modules 1
molker criteria 1
nanohardness 1
nanohardness map 1
nanoindentation 1
natural fibers 1
nickel-base superalloy 1
nitridation 1
noct model 1
non-classical creep 1
nucleation 1
numerical modeling 1
numerical optimization 1
optimization 1
out of plane 1
oxidation 1
parameters 1
part ii 1
parts 1
photovoltaic efficiency 1
photovoltaic module temperature 1
pitting corrosion 1
pla 1
plane strain tensile test 1
plastic flow 1
plastic instability 1
poissons ratio 1
polymer 1
power 1
pre-deposition 1
precipitation 1
print orientation 1
process parameters 1
progressive failure 1
raman 1
recycling 1
reentrant 1
relative density 1
reliable modeling methodologies 1
residual-stresses 1
responses 1
restart local search algorithm 1
rotor 1
s modulus 1
safety factor 1
seismic protection 1
selection 1
sensitivity analysis 1
shear-strength 1
sheet 1
sheet metal forming 1
sheets 1
sigma-phase 1
simulations 1
soil 1
solid-solution phase 1
speed 1
stabilizers 1
stacking sequences 1
steel plate damper 1
strain 1
strain rate sensitivity 1
strategy 1
stress computation 1
stress-strain curve 1
stress–strain curve 1
super duplex stainless steel 1
superalloy 1
surface analysis 1
surface-roughness 1
surfaces 1
sustainable construction 1
system 1
systems 1
technologies 1
temperature dependency 1
temperature distribution 1
tensile 1
tensile flow 1
tensile–compression tests 1
tensile&#8211 1
tension-compression asymmetry hcp 1
thermal field 1
thermal history 1
thermo-mechanical fatigue 1
thermomechanical model 1
thermoplastic 1
thin-wall deposit experiment 1
thomason coalescence criterion 1
three-point flexural strength 1
ti6al4v 1
ti6al4v titanium alloy 1
titanium alloy 1
titanium-alloy 1
titanium-alloy tc4 1
tool wear 1
torsion test 1
toughness 1
transverse failure 1
trends 1
turbofan engine 1
two-step creep minima 1
unidirectional composites 1
unidirectional fiber-reinforced composite 1
viscoplastic constitutive model 1
viscosity 1
void reduction 1
waam 1
wear behavior 1
wood 1
work-hardening behavior 1
yield function 1
young’s modulus 1
young&#8217 1

Listado ordenado de keywords declarados por el autor en publicaciones desde el año 2008.

Publicaciones WoS (Ediciones: ISSHP, ISTP, AHCI, SSCI, SCI), Scopus, SciELO Chile.


Descargar Descarga los datos de esta página (formato JSON).
Descargar Descarga los datos de esta página como un archivo Excel.