Muestra métricas de impacto externas asociadas a la publicación. Para mayor detalle:
Departamento Gestión de Conocimiento, Monitoreo y Prospección
Consultas o comentarios: productividad@anid.cl
Consultas o comentarios: productividad@anid.cl
3D-Printed sievenpiper metasurface using conductive filaments
| Indexado |
|
||||
| DOI | 10.3390/MA13112614 | ||||
| Año | 2020 | ||||
| Tipo | artículo de investigación |
Citas Totales
Autores Afiliación Chile
Instituciones Chile
% Participación
Internacional
Autores
Afiliación Extranjera
Instituciones
Extranjeras
Abstract
This article presents the design, construction and measurement of different 3D-printed Sievenpiper metasurfaces. The structures were printed using a conductive filament combined with regular polylactic acid PLA. Measurement shows a good agreement on the electromagnetic behaviour of the stop-bands generated by the fully 3D-printed metasurface and the simulated ideal cases, but with higher transmission losses due to the characteristics of the conductive filament.
| Ord. | Autor | Género | Institución - País |
|---|---|---|---|
| 1 | Stuardo, Pablo | Hombre |
Pontificia Universidad Católica de Valparaíso - Chile
|
| 2 | Pizarro, Francisco | Hombre |
Pontificia Universidad Católica de Valparaíso - Chile
|
| 3 | Rajo-Iglesias, Eva | - |
Univ Carlos III Madrid - España
Universidad Carlos III de Madrid - España |
| Fuente |
|---|
| DI-PUCV |
| Ministerio de Economía, Industria y Competitividad, Gobierno de España |
| Spanish Ministry of Economy |
| ANID |
| Agradecimiento |
|---|
| This research was funded by ANID INICIACION 11180434, ANID PCI MEC80180108, DI-PUCV 039.437, and the Spanish Ministry of Economy under project TEC2016-79700-C2-2-R. |
| This research was funded by ANID INICIACION 11180434, ANID PCI MEC80180108, DI-PUCV 039.437, and the Spanish Ministry of Economy under project TEC2016-79700-C2-2-R. The authors would like to thank Ocular3D for their support on the 3D-printing process. |
