Muestra métricas de impacto externas asociadas a la publicación. Para mayor detalle:
| Indexado |
|
||||
| DOI | 10.1016/J.MINENG.2008.05.004 | ||||
| Año | 2008 | ||||
| Tipo | artículo de investigación |
Citas Totales
Autores Afiliación Chile
Instituciones Chile
% Participación
Internacional
Autores
Afiliación Extranjera
Instituciones
Extranjeras
For the copper rougher flotation, the froth mean residence time (9-12 s) of non-floatable solids, derived from experimental measurement, was comparable with that obtained by measuring the gas flowrate and estimating the effective gas volume in the froth. While, the froth mean residence times of liquid and floatable solid were significantly larger, 21 and 24 s, respectively. (C) 2008 Elsevier Ltd. All rights reserved.
| Ord. | Autor | Género | Institución - País |
|---|---|---|---|
| 1 | Yianatos, Juan | Hombre |
Santa Maria Univ - Chile
Universidad Técnica Federico Santa María - Chile |
| 2 | Bergh, L. G. | Hombre |
Santa Maria Univ - Chile
Universidad Técnica Federico Santa María - Chile |
| 3 | TELLO-ARAYA, KAREM EVA | Hombre |
Santa Maria Univ - Chile
Universidad Técnica Federico Santa María - Chile |
| 4 | DIAZ-VARGAS, FRANCISCO JAVIER | Hombre |
Comision Chilena de Energia Nuclear - Chile
|
| 5 | VILLANUEVA, ADRIAN | Hombre |
Dept Met Engn - Chile
División El Teniente - Chile División El Teniente - Chile |
| Fuente |
|---|
| Comisión Nacional de Investigación Científica y Tecnológica |
| Universidad Técnica Federico Santa María |
| Comisión Nacional de Investigación CientÃfica y Tecnológica |
| Fondo Nacional de Desarrollo Científico, Tecnológico y de Innovación Tecnológica |
| Fondo Nacional de Desarrollo CientÃfico, Tecnológico y de Innovación Tecnológica |
| Universidad Técnica Federico Santa MarÃa |
| Agradecimiento |
|---|
| The authors are grateful to El Teniente Division Codelco-Chile for providing access to their plant and for valuable assistance in the experimental work. Valuable discussions with F. Contreras and L. Vinnett are also acknowledged. Funding for process modelling and control research is provided by CONICYT, Project Fondecyt 1070106, and Santa María University, Project 270522. |